Flanged Washers
In stock
Custom manufacturer 7 yrs CN
About Product
Formed Washers are used (details are needed for this section) With possible sizes ranging from (0.008″ – 0.250″ thick, and up to 4.00″ O.D.).Use the “RFI” Request for Information selection button to attach you design documentation detailing your desired shape and or thickness along with your comments or questions and allow us to provide you a quote.
| Category | Items |
|---|---|
| Stamping Production Equipment List | 220-ton AIDA Dual Crank Punch Press, with1/4" x 18" Wide servo feed and stock straightener180-ton Stamtec Press/Auto Feed,1/4 inch Capacity Rowe Servo-Feed With Power Straightener, Data Inst. (Wintress) Die Protection System172-ton Iada 2 point gap frame press, with 2003 Link press controls, with 79.5" X 30" bolster (L/R-F/B) bed and full die cushion 160-ton Toledo #5;7; Straight Side with Die Cushion Punch Press (Secondary Production)150-ton USI Clearing, O.B.I. Punch Press/ Auto Feed, 3/16 x 18 inches Capacity Perfecto Servo-Feed, Perfecto Power Straightener And Uncoiler, Ultrasonic Loop Control, Data Inst. Smart Pac Automation Control, W/8-Sensor Die Protection System150-ton Bliss O.B.I., Punch Press/Perfecto Servo Feed, Straightener, 3/16 x 18 inch Capacity100-ton Bliss O.B.I., A/C Punch Press (Secondary Production)121-ton Komatsu OBS CNC 110svs Super Series Punch Press, CWP Servo-Feed, CWP Straightener/Reel, Modulating Drive To 75 feet Per Minute with Ultrasonic Loop Control, Data Inst. Smart Pac Automation Control with 8-Sensor Die Protection System100-ton USI Clearing, Ac, O.B.I. Punch Press (Secondary Production)66-ton GI-60 Stamtec A/C, V/S OBS CNC Series Punch Press, Rowe 3/16 x 15 inches Dominator Servo Feed, Brueder 24 180-500.2 Combination Double End Reel and Straightener, Data Inst. Smart Pac Automation Control with 8-Sensor Die Protection System66-ton GI-60 Stamtec A/C, V/S OBS CNC Series Punch Press, Rowe 3/16 x 15 inches Dominator Servo Feed, P/A 5500 lbs Uncoiler, Data Inst. Smart Pac Automation Control with 8-Sensor Die Protection System60-ton Bliss O.B.I., A/C Punch Press (Secondary Production)60-ton Johnson A/C, V/S O.B.I. Punch Press with 8 inches Rapidair Autofeed, Wintress Tonnage Monitor60-ton Johnson A/C, V/S O.B.I. Punch Press with 8 inches Rapidair Autofeed, Clarktron Tonnage Monitor56-ton #6; Minster A/C O.B.I. Punch Press (Secondary Production)45-ton Toledo #5;a A/C O.B.I. Punch Press (Secondary Production)43-ton Johnson A/C O.B.I. Punch Press (Secondary Production)35-ton Diamond A/C O.B.I. Punch Press with 6 x 6 inches Rapidair Autofeed, Wintress Tonnage Monitor35-ton Diamond A/C O.B.I. Punch Press with 11/2 x 4 inches Rapidair Autofeed, Wintress Tonnage Monitor35-ton Clearing Torc-Pac A/C, V/S & Stroke Punch Press35-ton Rousselle O.B.I. Punch Press30-ton Niagara #4;.5 O.B.I. Punch Press25-ton Wayne A/C with 6 x 6 inches Rapidair Auto Feed Punch Press, Clarktron Tonnage Monitor20-ton L&J O.B.I. Punch Press1 – Coilmatic AirfeedRowe 11 Ga. x 10 inches Straightener/Feeder90-ton Amada/Pro-E CAM CNC Press Brake50-ton Dries & Krump Press Brake35-ton Dries & Krump Press Brake |
| Stamping/Tooling Machining Equipment List | 1-Mitsubishi Boring BarModel M-HT11/1416Complete with Mitsubishi Meldas 520-M control and "B" axisX-travel 78.7 inchesY-travel 59.1 inchesZ-travel 51.2 inches Spindle 4.3 inchesDiameter with Stroke 19.7 inchesHorsepower 30Loading Capacity of table 15,400 lbs.Renishaw Probe Systems1-Femco Horizontal Boring Mill Model WBMC-100R2Complete with Mitsubishi Meldas 520-M control and "B" axisX-travel 79 inchesY-travel 71 inchesZ-travel 67 inchesSpindle 4 inchesDiameter with Stroke 28 inchesMilling Spindle Diameter 8.86 inches1-Mitsubishi Vertical Machining CenterModel MPA-V70CX-travel 62 inchesY-travel 27.5 inchesVertical Z-axis 25.6 inchesMax/Min distance spindle to table 33 inches – 8 inches1-Mitsubishi Vertical Machining CenterModel MPA-V70CX-travel 52 inchesY-travel 27.5 inches Vertical Z-axis 25.6 inchesMax/Min distance spindle to table 33 inches – 8 inches1-Mitsubishi Vertical Machining CenterModel M-V5BX-travel 31.5 inchesY-travel 20.1 inches1-Mitsubishi CNC Vertical Machining CenterModel V-60E including all standard accessories and additional options1- Chevalier Fully Automatic Surface Grinder Model: FSG-2060TCTable Size: 21 x 62 inchesMaximum Grinding Length 60 inchesMaximum Grinding Width 20 inchesMaximum Distance from table to surface to Spindle Center Line 29.0 inches1-Chevalier Fully Automatic Precision Hydraulic SurfaceGrinder Model: FSG-1632ADTable Size: 15.75 x 31.5 inchesMaximum Grinding Length 32 inchesMaximum Grinding Width 16 inchesMaximum Distance from table to surface to Spindle Center Line 24.375 inches1-Chevalier Surface GrinderModel: 618 High Precision2-Chevalier Surface GrindersModel: 618MMaximum Grinding Length 18 inchesMaximum Grinding Width 6 inchesMaximum Distance from table to surface to Spindle Center Line 18 incheswith Sony Digital Readouts1-Clausing/Metose Precision LatheModel: 1440 Bed 14 x 40 inches2-Bridgeport Series I Standard Mills With Digital Readouts and Power FeedTable travel x-axis 30 inchesSaddle travel y-axis 12 inchesQuill travel 5 inchesKnee travel z-axis 16 inchesTable size: 42 x 9 inches 2-Clausing Vertical Milling Machines with Proto Trak MX2 |
| Support Equipment | Japax LUX-3 Wire EDM, with 5.0 Bridgeport Easy Cam SoftwareJapax LXE Wire EDM, with 5.0 Bridgeport Easy Cam SoftwareSupermax 3 H.P. CNC 3-Axis Vertical Mill, Computer Programable, with Fixturing OR 6 inches ViseProtoTRAK K3S2 CNC Milling Machine With SM2 ControlProtoTRAK K3 CNC Milling Machine With Edge Control ProtoTRAK TRL 1440S CNC Lathe With SL Auto ControlBridgeport 2 H.P. Milling Machine with Q.M.S Readout, 6 inches ViseExcello 2 H.P. Ram Turret Milling Machine with TRAK 3 Position Readout, 6 inches ViseBridgeport 1-1/2 inch H.P. Milling Machine with 6 inches ViseTech-Turn 13 inches Swing x 42 inches LatheSullair 30 Hp Rotary Screw Air CompressorZeks Auto Air Drying System25 H.P. Quincy Air Compressor with Aftercooler/Water Separator15 H.P. Quincy Air Compressor with Aftercooler/Water Separator5 H.P. Ingersol Rand Air Compressor80 x 12 feet Die Racking SystemSafety Kleen Parts WasherMisc. Airfeeds, Uncoilers, And StraightenersMisc. Master Dies, Inspection Equipment, Hand Tools, Tool Cutters, Tool Boxes, Etc. |
| Secondary Operation Equipment | 3/4 H.P. Delta Drill PressClausing 10 x 15 inches Automatic Wet Grinder, 1 x 12 inches WheelHarrig 6 x 12 inches Surface Grinder with 12 inches Electro MagnetWells 6 x 10 inches Cutoff SawMyford MG12 Grinder2 – Boyer 6/12 Surface GrinderSnow 3/8 inch Auto Tapping MachineBrother BT-2-225 Auto Tapping MachineElectra 6715 Auto Heat Treat And Draw FurnaceWilson Model #4;TT BB Hardness TesterWilson Model #HR 150A Hardness TesterYoder 10,000# 10 Ga. x 36 inches Wide Coil Slitting Line with Wean Over Arm/Coil Separator10 Cubic Foot C&S Rapid Finish Deburring Machine with Auto Unload10 Cubic Foot Rosler Automatic eated Parts Drying Machine10 Cubic Foot Sweco Rotary Deburring Machine5 Cubic Foot Sweco Rotary Deburring MachineChicago Turret Self Feed Rivet MachineMiller Portable Spot WelderMiller Model #CP-200 Wire Feed WelderA.O. Smith 350 Amp WelderCraftsman #30;-230 Portable Welder Snapon Model #YA 3330 Portable Plasma Cutte |
Key attributes
Know your supplier
Website:http://www.daco-precision.com/index.html
Company Name:Daco Precision – Tool
Location:Kewaskum, WI 53040
Description:ISO 9001:2015 certified. Custom manufacturer of metal parts. Specialize in made-to-order parts per print. Offer metal stampings, production machined or laser cut parts, and tool or die. All stamping dies are designed, built, and maintained in-house.
Product Reviews
Maden is absolutely amazing! Their team was a real pleasure to work with and check out our documents
Vlad Matsiiako
Co-founder, Infisical
Maden has been amazing for us! Even as a small team, we struggled to keep up with development and update documentation as changes were made. Now the docs are managed as code and are part of the development process and PR. As an open source project, moving documentation has
Maayan Salom
Co-founder, Elementary
This is a must have if you are building any kind of developer tools. We have used other options in the past that seem outdated in terms of look and feel compared to Maden. The team helped us
Zeno Rocha
CEO, Resend
My team loves Maden! Great product team.
Adam Carrigan
Co-founder, MindsDB
Maden was the only option that met all the requirements. To get the look, feel and features. or Mintlify be
Ashley Mulligan
Head of Product Engineering, Flatfile
Absolutely the best. It's damn easy to set up and the team was great to work with
Chun Jiang
CEO, Monterey AI
Why spend a week coding your own documentation (and optimizing it for SEO, design, etc.) when Maden gives you the best documentation in minutes?
Charly Poly
CEO, Defer
The way Maden displayed its documentation felt really user-friendly to us, and more importantly, to our developer customers.
Mark Bao
Co-founder, Goody
$0.00
Shipping
Shipping solutions for the selected quantity are currently unavailable
Delivery via maden
Expect your order to be delivered before scheduled dates or receive a 10% delay compensation
Secure payments
Every payment you make on Maden is secured with strict SSL encryption and PCI DSS data protection protocols
Refund policy
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Maden protects all your orders placed and paid on the platform with 
Buy now, pay later.
Learn more
Pay in 4 interest-free payments. Learn more
Frequently bought together
Supplier's popular products
Explore from Premium Brands
Adidas
Amcrest
Apple
Asus
Baxter
Casio
Electrolux
Galaxy
Samsung
Sony
Syma
XBox
Frequently Asked Questions
What is Maden?
Maden is a multi-vendor marketplace platform where businesses can showcase and sell their products. We aim to connect vendors and customers, creating a thriving business ecosystem.
How do I become a seller on Maden?
Many vendor profiles have already been created on Maden. Simply search for your business, claim your profile, verify your business, and start adding products to sell.
Why is there already a profile for my business on Maden?
We’ve created preliminary profiles for various businesses to streamline the onboarding process. If you see your business listed, you can claim and verify it to start selling on Maden.
How do I claim my business profile?
To claim your profile, locate your business on Maden, select the “Claim Profile” option, and follow the verification steps to prove ownership.
What verification is needed to prove my business ownership?
To ensure authenticity, you’ll need to provide official documentation or information that verifies your association with the business.
Are there any fees to sell on Maden?
Maden may charge fees based on transaction volumes or subscription models. Check our pricing page for details on fees and any applicable charges.
Can I customize my profile on Maden?
Yes, once you claim your business profile, you can customize it to reflect your brand, add a logo, and upload your product listings.
How can I increase my visibility on Maden?
We offer promotional tools, such as featured listings and sponsored placements, to help businesses reach a wider audience.
What support is available if I face issues with my account?
Our customer support team is available to help with any issues. You can reach out through the contact section on the Maden website.
