Safety Cable™ Terminator Tools

The unique tensioning/crimping Terminator Tool tensions the cable, crimps the ferrule on the cable, and cuts the cable flush with the ferrule. This tool utilizes the best principals of ergonomic design, user-friendly features, and improved operational durability. It is so user friendly that an entry level technician can learn the Safety Cable installation method in less than 30 minutes.The short length of this tool allows the user to get into tight places where access is restricted. The ergonomic design comfortably fits the operator’s hand. The robust construction and the precise dimensional quality of the tool provide the reliability and repeatability that you are looking for. The tool nose can be rotated 360º for the optimum position of each Safety Cable™ installation while allowing the tool to stay in a comfortable ergonomic position.The tension setting on the Safety Cable™ Terminator Tool is fully adjustable by the user. The cable tension can easily be increased or lessened by turning an adjustment screw in the tension wheel assembly.This series of ergonomic Terminator Tools will enhance the efficiency and cost savings that can be realized from the use of Bergen Safety Cable™ System as an alternative to lockwire.The Safety Cable™ Terminator Tools are available in three cable diameter configurations: a tool 0.022″ diameter cable, one for 0.032″ diameter cable, and one for 0.040″ diameter cable. A specific tool is required to apply each diameter cable. If you are installing different diameters of cable, you will need multiple tools. All tools are available with a 3″, 5″ or 7″ inch nose.