VFD Motor Assembly for H-Series Pumps

This package is designed to simplify selection of motors and drives to provide an out of the box solution that can plug into a wall outlet and allows the end user to control the flow rate of the pump by adjusting the motor speed. The standard drive is designed to be user friendly, without the myriad of confusing parameters required by most VFDs. The display is configured at the factory to display RPM, but can be easily set to display frequency (Hz) or a scaled value i.e. 0-100%. The speed can be adjusted using either the up/down arrow keys or the built in potentiometer. A built in power switch allows the drive to be turned off using the drive itself. The drive is configured to accept 115 VAC, single phase input power. It can be field adjusted to accept 230 VAC single phase power. If 4-20mA control is desired, a field installable board can be supplied as an add on to accept control input signals from devices such as flow meters or pH sensors. Motor Specifications: 1 HP TEFC 20:1 Constant Torque Cast Iron Frame Drive Specifications: 115 VAC, 1 Phase Input Supplied with 10ft Wall Plug (NEMA 5-15) NEMA 1 Enclosure Digital Display On/Off Line Switch Built in keypad or potentiometer control Optional Input/Output (4-20mA) board

Error: Invalid or empty JSON data